Comparison of advantages of large building glass roof sunshade products

Large building daylighting roof can generally be set from the outside of the daylighting roof and the inside of the sunshade two ways, referred to as the inner sun shade and the outer sun shade. According to the experience of the daylighting roof shading project over the years, the editor has counted the four most commonly used shading products for large daylighting roofs, internal shading: electric ceiling shade shade (FTS/FCS/FSS ceiling shade), external shading: outdoor canopy. Today we will make a comparison from the aspects of cost budget, installation and maintenance, shading effect and so on.

Cost budgeting aspect

In the case of a single set of the same size, because the outdoor canopy is installed in the outdoor, the system material requirements are high, so the material cost is higher than the indoor canopy curtain; The material cost of FTS is the highest in indoor canopy curtains, and FSS and FCS are similar. However, there is no need for outdoor canopy installation, and the finished products are convenient for installation. The FTS system can cover an area of 50 square meters (span up to 20 meters), FSS system 20 square meters (maximum span 8 meters) and FCS system 35 square meters. Therefore, the sunshade cost of a daylighting roof cannot be determined solely by the selected products. Distribution, installation environment and other factors need to be considered.

Installation and maintenance

Shopping malls, pavilions, public buildings and other large glass lighting ceilings are generally higher vertical height, indoor electric canopy curtain installation and maintenance need to be installed, there are high cost of erection, installation difficult, late maintenance difficult, poor safety and many other problems, while the outdoor canopy is perfect to avoid these problems. Especially for properties that are already in business, the installation advantages of outdoor ceilings are significantly greater than those of indoor ceilings.

Shading effect

The shading and heat insulation effect of the internal shade is far less than that of the external shade, and there is no obvious difference between the indoor electric canopy curtain and FTS/FCS/FSS canopy curtain.

Interior decoration aesthetics

The outdoor awning products will not have any impact on the interior decoration. FSS and FTS are rolled and the fabric is flat and stretched, and the withdrawn fabric is well concealed on the coiled tube, while FCS is rolled and the folded awning curtain is evenly wavy, and the withdrawn fabric is folded together. Therefore, FTS and FSS are more flat and beautiful than FCS.

In general, the selection and design of shading products should be determined according to the external and internal shape decoration, pattern, shading requirements, etc., and of course, it is also determined by personal preferences. However, professional design scheme, excellent product quality and perfect technology are the essential elements of modern building daylighting roof electric shading, so it is very important to choose a manufacturer of pre-sales and after-sales service.